Installation
Installation is fast and easy; plugging cables into their appropriate ports is all that is entailed. A Master View CS-102/CS-
122 unit can control two PCs. To control even more computers, units can be cascaded to three levels, with each other, and
down from CS-104s and CS-106s.
One Stage Installation
A One Stage Installation enables one CS-102 or CS-122 to control up to two computers, as shown in Fig. A, below.
Fig. A
1.
Set DIP switch 4 to
ON
.
2.
Connect the monitor output port, mouse port, and keyboard port of the computer to either of the PC ports on the CPU
SWITCH with appropriate cables. 5-pin DIN connectors are for AT style keyboard sockets; 6-pin mini-DIN connectors
are for PS/2style keyboard sockets.
3.
Use either port per computer.
4.
Add a power adapter if the CPU Switch works abnormally.
Summary of Contents for Master View CS-102
Page 11: ......
