Selecting the Active Port:
Each CPU port is assigned a numeric Port ID (1 - 4). Instead of
switching to a port with the Port Selection switches, you can
give the KVM focus directly to any computer on the installation
with a Hotkey combination. The steps involved are:
1. Invoke Hotkey Mode (see p. 9)
2. Press and release the appropriate Port ID number (1, 2, 3,
or 4)
After you press the number, the KVM focus switches to the
designated computer and you automatically exit Hotkey Mode.
Auto Scan Mode:
The CS-74A’s Auto Scan feature automatically cycles through
the Ports at regular 5 seconds intervals so that you can monitor
the computer activity without having to take the trouble of
switching manually. To invoke Auto Scan Mode:
1. Invoke Hotkey Mode (see p. 9)
2. Press and release [A]
Once scanning begins, it continues until you press [Esc] or
[Spacebar] to exit Auto Scan Mode. The Port that is active at
the time scanning stops remains active.
Note: 1. While Auto Scan Mode is in effect, ordinary keyboard
and mouse functions are suspended. You must exit
Auto Scan Mode by pressing [Esc] or [Spacebar] in
order to regain normal control of their use.
2. Pressing [Esc] or [Spacebar] exits both Auto Scan
Mode and Hotkey Mode.
- 10 -
2003-02-18
