Components
Front View:
1. Port Selection Switches
Press a switch to give the KVM focus to the system attached
to its corresponding port.
M
Pressing Buttons 1 and 2 simultaneously for 3 seconds
performs a Keyboard and Mouse Reset.
M
Pressing Buttons 3 and 4 simultaneously for 3 seconds
starts Auto Scan Mode (see p. 10).
2. Port LEDs
The Port LEDs are built into the Port Selection Switches. A lit
LED indicates that its corresponding Port is the one that has
the KVM focus.
Depending on the Port’s status, the LED may flash
according to a specific pattern (see the table on p. 12 for
details).
- 4 -
1 & 2
2003-02-18
