Appendix
61
IP Address Determination
If you are an administrator logging in for the first time, you need to access the
eco PDU in order to give it an IP address that users can connect to. There are
two methods to choose from. In each case, your client computer must be on the
same network segment as the eco PDU. After you have connected and logged
in you can give the device its fixed network address. (See
Method 1:
For computers running Windows, an IP address can be determined and/or
assigned with the IP Installer utility. The utility can be obtained from the
Download
area of our web site or from the software CD. Look under
Driver/
SW
, and the model of your device. After downloading the utility to your
computer, do the following:
1. Unzip the contents of
IPInstaller.zip
to a directory on your hard drive.
2. Go to the directory that you unzipped the IPInstaller program to and run
IPInstaller.exe
. A dialog box similar to the one below appears:
(Continues on next page.)
