Chapter 4. Browser Operation
51
Authentication & Authorization
The Authentication & Authorization page is used to set up login authentication
and authorization management from external sources.
RADIUS Settings
To allow authentication and authorization for the eco PDU device through a
RADIUS server, do the following:
1. Check
Enable
.
2. Fill in the IP addresses and service port numbers for the Preferred and
Alternate RADIUS servers. The default port number for the Preferred
server is 1812; the default port number for the Alternate server is 1645.
Note:
Make sure that the port numbers you specify here match the port
numbers used by the RADIUS servers.
3. In the
Timeout
field, set the time in seconds that the eco PDU device waits
for a RADIUS server reply before it times out.
4. In the
Retries
field, set the number of allowed retries for attempting to
connect to the RADIUS server.
5. In the
Shared Secret
field, key in the character string that you want to use
for authentication between the eco PDU device and the RADIUS Server.
