eco PDU PG Series User Manual
35
User Information
To add a user, do the following:
1. Set the Management field to
Enable
.
2. Key in a name and password in the Name and Password fields.
3. Set the outlet-by-outlet permissions of the user in the Outlet field.
4. Click
Save
to save your settings.
Note:
Values must be entered in both the Name and Password fields in
order to enable an account.
The available options are explained in the following table:
Field
Description
Management
The Management field allows you to Enable or Disable a
user’s account:
Enable – stores the user account
Disable – disables the user account
Name
From 1 to 16 characters are allowed.
Password
From 1 to 16 characters are allowed.
Outlet
This field allows you to set the outlet-by-outlet permissions of
the user. Click on the user/port icon to cycle through the three
permissions options, as follows:
User has complete access to this outlet.
User has read-only access to this outlet.
User has no access to this outlet.
Summary of Contents for PG98230 Series
