background image

- 2 -

Compliance Statements

FEDERAL COMMUNICATIONS COMMISSION 
INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the 
limits for a Class B digital service, pursuant to Part 15 of the 
FCC rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential 
installation. Any changes or modifications made to this 
equipment may void the user’s authority to operate this 
equipment. This equipment generates, uses, and can radiate 
radio frequency energy. If not installed and used in accordance 
with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference 
by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different 
from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician 
for help.

The device complies with Part 15 of the FCC Rules. Operation 
is subject to the following two conditions: (1) this device may 
not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause 
undesired operation.

Summary of Contents for UC2322

















Reviews: