7
Chapter 2
Hardware Setup / Configuration
Connecting the Unit
Follow the steps below to connect the UH3239 unit.
1. Connect a USB-C PD power adapter or a USB-C peripheral device to the
unit’s USB-C DC-in port, respectively for power redundancy or peripheral
device operation.
Note:
Please connect the USB-C PD power adapter to the USB-C DC-in
port before using the dock. Plugging or unplugging of the USB-C
DC-in port may cause a momentary disconnection on USB devices
connected to the dock.
2. Connect a USB-C enabled host device to the unit’s USB-C host connector.
3. For video display, connect an HDMI monitor to the units’ HDMI output
port.
4. Connect USB peripheral devices to the unit’s USB 3.2 Gen 1 Type-A
ports.
5. Insert an SD or Micro SD card into their respectively card reader slots.
Please review the safety information regarding the placement
of this device in
7
5V
12V
15V
20V
Support
Check USB charge rate of your laptop*
The total charging time may vary
depending on the devices connected to
the UH3239.
*USB-C PD power adapter is not included in the package.
