VM5404H / VM5808H User Manual
16
Enter Password
Upon VM5404H / VM5808H startup, check the front panel LCD to view the
loading progress. If the Password screen / LCD Menu fails to load, an error
message displays. Reset the unit and try again.
If you are accessing the VM5404H / VM5808H for the first time, the Password
screen appears as soon as the LCD loading process is done. Enter the default
password 1234 to continue to the Main Screen (see
Additionally, the Password Screen appears if the VM5404H / VM5808H has
been configured to require a password for Front Panel operation (see
To enter a password, do the following:
1. In the
Enter Password
field, check that the cursor is at the first asterisk
(*) and flashing.
2. Use the front panel Input Port pushbuttons (1–8) or (1–4) to enter the 4-
digit password. After the fourth digit has been entered correctly, the Main
Screen displays.
3. Press
Cancel
to clear the password. The digits revert to 4 asterisks and the
cursor goes back to the first asterisk.
Note:
1. The VM5404H / VM5808H password can be any four digit
combination between 1111 to 8888 (VM5808H) or 1111 to 4444
(VM5404H). The default password is 1234.
2. If you enter an incorrect password, the cursor goes back to the
first digit and reverts to flashing. The Incorrect Password message
displays at the bottom of the screen, but clears as soon as a new
password is entered.
3. If Password option is Enabled (see
, page 30), the
LCD display time-out is 5 minutes by default.
Enter Password: * * * *
Incorrect Password
