VM5404H / VM5808H User Manual
30
Security Mode
The Security Mode page allows users to manage the VM5404H / VM5808H’s
security-related settings. Three security modes are available: None, Password
Enable and Lock Screen. The VM5404H / VM5808H’s password can also be
changed here.
To configure the VM5404H / VM5808H’s security settings from the Main
Screen, use the
Menu
pushbutton to access the Menu page, press
8
or
Next
to
navigate to the next page, then press pushbutton
2
to access the Security Mode
page.
Mode
1. To change the VM5404H / VM5808H’s security mode, press pushbutton
1
in Security Mode.
2. In the Mode menu, to disable security settings, press pushbutton
1
. The
menu will then return to Security Mode. To require a password after the
LCD display times out or is powered off/on, press pushbutton
2
. The menu
will then return to the home screen.
Note:
If Password is Enabled, the LCD display’s default time-out is 5 minutes.
The VM5404H / VM5808H’s default password is 1234.
3. To enable a lock screen, press
8
or
Next
to navigate to the next page, then
press pushbutton
1
. The menu will then return to the home screen. When
Lock Screen is enabled, pressing any pushbutton from the home screen
will trigger the following message:
Please press “Menu” to start.
1: Operation Mode
2: Security Mode
8: Next
7: Back
1. Mode: None
2. Change Password
1. None (In Use)
2. Password Enable
8: Next
1. Lock Screen
7: Back
