Chapter 3. Front Panel Configuration
13
Output Port Assignment
Use the Output pushbuttons to select the Output port you want to configure.
To assign an input to one output, do the following:
1. Press any Output pushbuttonn. The input assigned to this output lights
yellow.
2. To assign another input to this output port, press the Input pushbutton. The
pushbutton of the assigned input lights yellow.
If an Output pushbutton is pressed a second time, it is deselected and the
LED turns off.
To assign an input to multiple outputs, do the following:
1. Press the pushbuttons for the outputs to which you wish to assign a
common input. These Output pushbuttons light blue.
2. Press an Input pushbutton to assign the input to the outputs you selected in
step 1.
Note:
To deselect an output, press the pushbutton again. The pushbutton dims.
Pressing the
Cancel
pushbutton once stops the Output Port Selection
operation and the LCD displays the active setting. Pressing the
Cancel
pushbutton again turns all LEDs off.
After 10 seconds of inactivity, all the LEDs turn off.
INPUT 1 2 3 4
OUTPUT 1 2 3 4
Summary of Contents for VM6404HB
