background image

Chapter 4. Browser Operation

75

HDMI Forum Vendor Specific Block

This screen shows the display device’s supported video parameters. Use the 
toggle button to enable or disable this function. 

Š

3D OSD Disparity:

 Select this option to have Sink support receiving 3D 

OSD Disparity Indication in the HF-VSIF.

Š

Dual View:

 Select this option to have Sink support receiving 3D Dual 

View in the HF-VSIF.

Š

Independent View:

 Select this option to have Sink support receiving 3D 

Independent View in the HF-VSIF.

Š

LTE 340Mcsc Scramble:

 Select this option to have Sink support 

scrambling for TMDS Character Rates at or below 340 Mcsc. 

Š

RR Capable:

 Select this option to have Sink initiate an SCDC Read 

Request. 

Š

SCDC Present:

 Select this option to have Sink support SCDC 

functionality. 

Š

DC 30bit 420:

 Select this option to have Sink support 10-bits/component 

Deep Color 4:2:0 Pixel Encoding.

Š

DC 36bit 420:

 Select this option to have Sink support 12-bits/component 

Deep Color 4:2:0 Pixel Encoding.

Š

DC 48bit 420: 

Select this option to have Sink support 16-bits/component 

Deep Color 4:2:0 Pixel Encoding.

Use the drop down menu to select the 

Audio Format

 (1~6) applicable to your 

audio output device, and click 

Save

 to apply the changes.

Summary of Contents for VM6404HB






























































































































Reviews: