Chapter 5. CLI Commands
95
Scaling Command
The Scaling command allows you to set a resolution for scaling the display
connected to an output port.
The formula for the Scaling command is as follows:
C Number 1 + Horizontal Reso Number 2
+ Vertical Reso Number 3 + Fre Number 4 + Control
+ [Enter]
1. For example, to turn scaling off for output port 02, type:
scaling o02 off [Enter]
2. To set the scaling for output port 04 to 1920x1080@60Hz, type:
scaling o04 1080p [Enter]
3. To set the scaling for all output ports to the connected display’s native
resolution, type:
scaling o* native [Enter]
The following tables show the possible values for the
Scaling
command:
Command
Description
scaling
Scaling command
Output
Description
o
Output command
Port Number
Description
yy
01~04 or 01~09 port
*
All output ports
Horizontal
Resolution
Description
hor
Horizontal resolution command for
scaling
Resolution Number
Description
hhhh
Horizontal resolution
Vertical Resolution
Description
ver
Vertical resolution command for
scaling
Summary of Contents for VM6404HB
