- 5 -
Installation
1. Use a VGA cable with high density DB-15 Male/Female
connectors to connect the video output port of your Local
computer to the VS-201's Local port.
2. Use a VGA cable with high density DB-15 Male/Female
connectors to connect a remote video signal (from another
computer or another video switch) to the VS-201's Remote
port.
3. Plug your monitor's cable into the VS-201's Video Out port.
4. Power on the VS-201 by plugging in its AC adapter.
Example 1
Stand-Alone Connection - 2 Computers:
vs201.fm Page 5 Thursday, June 12, 2008 10:42 AM