Quick start manual -
F5200
MR-F5200B-U
Quick start manual
ATEQ F5200
Page 14/17
2. SPECIAL CYCLES
To start a special cycle, select it in the "
Special cycles
" menu, then pres the
key.
To stop it, press the
key or for some cycles the end is automatic.
See the manuals CDROM for further information.
2.1. S
TANDARD SPECIAL CYCLES
Following the extended menus validations or following the device options, some des
special cycles can appear:
None:
no special cycle selected.
Infinite fill:
to pressurize the part with a infinite fill time.
Piezo auto zero:
to run an auto zero cycle on the piezo sensor and on the electronic
pressure regulator.
Sealed component learning pass and fail part:
this is pressure parameters learning
cycles for the sealed component mode. The pass part learning cycle is obligatory.
Calibration check:
cycle to check the calibration by volume with a pass part.
Learning / Check:
these cycles allow running a learn or a check cycle (or both) in
Pascal or Pascal/sec calibrate mode with a master leak.
ATR Learning:
cycle to enter ATR parameters; this is to run at each switching on of the
device or after a long time without measurement.
Volume calculation:
cycle to calculate the volume of the test circuit.
2.2. S
ERVICE SPECIAL CYCLES
These special cycles are used to perform operations pressure settings and services on
the pressure sensors and the valves.
Calibration of pressure sensor 1 on regulator 1 / Calibration of pressure sensor 1 on
regulator / Calibration pressure sensor 2 / Differential sensor calibration / Sensor status /
Valve Auto-test:
3. OTHERS MENUS
Parameters service:
to save, recover or delete the test cycles parameters.
Result menu:
this is to manage the results, display, reset or print.
Language menu:
to choose the language displayed on the screen.
Stand by menu:
to turn off the device without unplug it. Stand by can be immediate or
scheduled with run and stop hours.
Summary of Contents for F5200
