5.2.- Installation and guiding of the electrical cables
All the cables used in the installation must be secured in order to prevent movements
that could cause damage or breakages.
ATERSA solar modules hardly require any maintenance but you must follow a set of
guidelines to ensure good condition.
Our solar modules are made from high-efficiency square cells that are capable of
producing power with low solar radiation. All the models from 75W to 320W have by-
pass diodes in the junction box.
The technical characteristics of the modules are shown in the attached table and
grapichs. View table on page 9 (Polycrystalline) and page 10 (Monocrystalline).
ATERSA guarantees the power output for up to 25 years and provides a 10-year
warranty covering manufacturing flaws.
The modules comply with IEC 61215:2005 and IEC 61730 standards, in addition to
being manufactured under strict UNE-EN ISO 9001:2008, UNE-EN ISO 14001:2004
quality standards.and OHSAS 18001:2007.
6.- MAINTENANCE
7.-
8.-
x
x
x
x
x
x
x
x
x
x
x
x
Maintenance work should be carried out by qualified personnel, as it could involve working with
dangerously high voltages.
Check that dirt has not accumulated on the glass of the panel.
Should this be the case, clean the glass with a sponge and soapy water
In case if water is not available,Module can be dry cleaned with the help of a soft cloth or with soft
sponge to remove dirt, dust.
DO NOT use brushes or abrasive products as they can damage the glass and reduce the power
module.
DO NOT use any chemical abrasive cleaners, degreasers, or cleaning.
DO NOT use water jet cleaning system.
DO NOT clean the panels at their hottest (midday).
Check the cables and electrical connections.
DO NOT use lubricant oils or sprays to connect the connectors..
Appropriate electrically insulating Personal Protective Equipment (PPE) must be worn during any
cleaning or inspection operations.
Check that the mechanical components are not damaged
.
TECHNICAL SPECIFICATIONS
GUARANTEE AND CERTIFICATES
According to the norm IEC 61730-1, the application class for this product (ATERSA
module) is class A, which corresponds to modules working in voltages above 50V or
powers above 240W where the access to a general contact is forecasted. The modules
clasified for security within this category fulfill the requirements for ClassII.
8
MODULE
Installation and User Manual
EN-MU-41 (4)-E
