Clamping method Hook M8 (*)
Short side
14
Module assembly drawings depending on the applied mechanical load
Clamping method Other(*)
Long side
2400Pa
0000000000000
Clamping method Other(*)
Short side
0000000000000
0000000000000
Clamping method Hook M8 (*)
Long side
0000000000000
0000000000000
Guide instertion
(*) The areas marked in the drawing (A and B) are intended for the fixation of the laminate and ensure
proper installation.
Always use fastening systems that do not damage the laminate.
According to standard IEC 61215:2005
Note:
ATERSA reserves the right to modify the product specifications without notice.
For more extensive information about the terms of the warranty and certificates y, please see our website:
www.atersa.com
13
13.2
Polycrystalline and Monocrystalline
13.1
Laminate assembly drawings depending on the applied mechanical load
14.1
E
0000000000000
F
80 mm.
11 mm.
G
13 mm.
E
225 ± 25.0 mm
=
Laminates 60 cells
Using two sidebars at distance E from
the edge and a central.
E
G
F
E
Special clamps for laminates (*)
Long side
F
2400Pa
B
B
0000000000000
A
B
B
0000000000000
Directly on the Structure
B
B
B
B
Distance A:
Distance B:
60mm (Minimum)/
module 72 cells B
445.5 mm; modulel 60 cells B
284.5 mm
=
=
5400Pa
Clamping method Hook M8 (*)
Long side
Clamping method Other(*)
Long side
Screws
A
E
E
ANNEX
EN-MU-41 (4)-E
Module with 72 cells and 4.0 mm. of thickness of the glass.
With 3.2 mm. 2.400 Pa.
