PROGRAMMING
The Leo regulators made by ATERSA have been submitted to various check
controls with equipment gauged by external laboratories ENAC. It is not advisable
to modify the adjustments permitting this menu if the equipment you use is not
enough gauged.
Do not make this adjustment when it is in floating phase (led nº 2 lit), if you try to, the
message 'Err' will appear on the display.
Measure the voltage IN THE REGULATOR TERMINALS!!. Later on:
1.Push simultaneously
until the message 'ALL' appears on the display.
2.Push battery voltage
. The play of the voltage will be maintained on the display.
3.Push
to reduce or
to increase.
4.Push
to accept and record
.
Do not make this adjustment when it is in floating phase (led nº 2 lit), if you try to, the
message 'Err' will appear on the display.
Then, place the ammeter in series in positive line of panels and:
1.Push simultaneously
until 'ALL' appears on the display.
2.Push charge intensity
. The play of the charge intensity will be maintained on the
display.
3.Push
to reduce or
to increase.
4.Push
to accept and record.
Do not make charges if the connected charges can consume in form of intensity
peaks or when the regulator unplugged the charge for low voltage (led nº 5 lit).
Then, place the ammeter in series in positive line of consumption and:
1.Push simultaneously
until 'ALL' appears on the display.
2.Push consumption intensity
. The play of consumption intensity will be maintained on
the display.
3.Push
to reduce or
to increase.
4.Push
to accept and record.
Adjustment play Battery Voltage:
Adjustment play Charge Intensity:
Adjustment play Consumption Intensity:
+
+
A
V
A
A
A
A
+
+
A
V
A
V
A
A
V
+
+
A
V
A
A
A
A
V
V
DIGITAL CHARGE REGULATOR
LEO1
10
MU-12-L
