OPTIMUM GS MODULES INSTALLATION MANUAL
Page 21
Aplicaciones Técnicas de la Energía S.L. (ATERSA)
www.atersa.com – atersa@elecnor.com
Madrid (Spain) +34 915 178 452 - Valencia (Spain) +34 961 038 430
Module
A-xxxM GS (for 60 cells 6”).
where xxx = 235~270 in step of 5 W..
Max. power (W)
235
240
245
250
255
260
265
270
Open-circuit voltage (V)
37,70
37,77
37,86
38.00
38,10
38,20
38,31
38,42
Max. power point voltage (V)
29,38
29,86
30,21
30,49
30,92
31,18
31,48
31,73
Short-circuit current (A)
8,59
8,64
8,70
8,78
8,84
8,92
8,99
9,08
Max. power point current (A)
8,00
8,04
8,11
8,20
8,25
8,34
8,42
8,51
Efficiency (%)
14,4
14,8
15,1
15,4
15,7
16,0
16,3
16,6
*
Notes
Maximum System Voltage 1000V
Nominal Operating Cell Temp (NOCT) 46±2
ºC
Temperature Cycling Range -40 ºC to +85
ºC
Class C fire rating
Storage temperature:
-40°C to +40°C,
Wind pressure:
below 2400Pa
Humidity:
below 85RH%
The modules are qualified for application class A: Hazardous voltage (IEC 61730: higher
than 50V DC; EN 61730: higher than 120V), hazardous power applications (higher than 240W)
where general contact access is anticipated (Modules qualified for safety through EN IEC
61730-1 and -2 within this application class are considered to meet the requirements for
Safety Class II).
