OPTIMUM GS MODULES INSTALLATION MANUAL
Page 6
Aplicaciones Técnicas de la Energía S.L. (ATERSA)
www.atersa.com – atersa@elecnor.com
Madrid (Spain) +34 915 178 452 - Valencia (Spain) +34 961 038 430
5.
Warning
•
Cover the entire front surface of the PV module with a dense, opaque material such as
cardboard box, during installation and handling of the modules.
•
Do not expose Back sheet directly to sunlight.
•
Work only under dry conditions, with dry modules and Insulated tools.
•
Be sure to completely ground all modules.
•
Since sparks may occur, do not install the module where flammable gases or vapors
are present.
•
Module installation and operation should be performed by qualified personnel only.
Children and unauthorized persons should not be allowed near the installation of PV
modules.
•
Use module for its intended function only.
•
Be sure that all other system components are compatible, and they do not subject the
module to mechanical or electrical hazards.
•
Do not touch terminals while module is exposed to light or during installation. As a
Precaution use properly insulated tools only.
•
Do not damage or scratch the back sheet of the module.
•
Do not use the junction box to hold or transport the module.
•
Do not drop module or allow objects to fall on module.
•
Do not stand or step on the module.
•
Do not disassemble, modify or adapt the module or remove any part or labeling
installed/ pasted by the manufacturer.
•
Do not drill holes in the frame or glass of the module.
•
Do not treat back sheet and front surface of the module with paint and adhesives.
•
Do not artificially concentrate light on the module.
•
Do not wear metallic jewelry while installing or trouble shooting the module.
•
Do not change the wiring of bypass diodes.
