20
19
Inverters whose packages are not demolished can be moved with forklift, hoisting
crane or crane. In moving, attention shall be paid to the weight painted on the
package to ensure enough load capacity of the devices. As the gravity center of the
equipment locates at the lower place symmetrical in front and back and left and
right, the support point or hoisting point shall be arranged reasonably in
transportation.
The forklift transportation is the standard one. The gravity center of the cabinet in
transportation should locate between two forks of the forklift. The big-size inverter
may block driver's sight, and it shall be treated with cooperation of the aid
personnel.
Sign
Indication
Face up to prohibit the inverter horizontally,
tilted or upside down
Handle with care, to avoid the transport environment
too intense collision friction damage to the inverter
Keep away from moisture
4.3.2 Movement and installation of bare machine
[Demolish the package of inverter]
Please demolish the packaged cabinet of the equipment according to the following
procedures:
Procedure 1: Demolish the wood side and roof of the packaged cabinet
Procedure 2: Demolish the out-set package material on the machine
Procedure 3: Demolish the fastening screws between the machine and the pallet
Demolish the front and back cover lids of the pedestal;
Screw off the hold-down nuts at the bottom of the wood pallet;
Remove the screws, and the inverter will depart from the wood pallet.
The inverter must be installed on the foundation or foundation plate, therefore, all
fastening points (wall anchor and bolt) must be at their correct positions before
installation. Mounting dimension of foot margin on foundation is shown in Figure.
[Movement and installation of bear machine]
The inverter with demolished package can be moved with forklift, hoisting crane,
slide rail or crane.
If the package demolished place is far from the final installation place, it can be
transported with forklift containing wood pallet. It is shown in Figure.
NOTICE
Caution, risk of danger
We must act slowly and gently when transporting the inverter with
forklift to avoid violent vibration of the inverter or collision with
other objects.
Figure 4-3-2-1
Figure 4-3-2-2
