www.atestgaz.pl
8.3.3
Version PW-089-C-X
Figure 15: Wiring of the PW-089-C-X device
8.4
Device configuration
Signaller are factory configured by their manufacturer. Configuration options are described in Section 5.
8.5
Troubleshooting
PW-091-S-X / PW-089-S-X and PW-091-M-X / PW-089-M-X device are furnished with self-test functions (see
details in Section 5.3).
8.6
Maintenance schedule
8.6.1
Maintenance
Device must never be cleaned with agents that contain solvents, white spirit naphtha or alcohols.
The device needs no other maintenance beside cleaning external surface of the housing. These surfaces
should be wiped with a soft cloth moistened with water and slight amount of a mild detergent.
8.7
Disposal
This symbol on a product or on its packaging indicates that the product
must not be disposed of with other household waste. Instead, it is the
user's responsibility to ensure disposal of waste equipment by handing it
over to a designated collection point for the recycling of waste electrical
and electronic equipment. The proper recycling of your waste equipment
at the time of disposal will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health and the
environment. Information about relevant designated collection points can
be obtained from the Local Authority, waste disposal companies and in
the place of purchase. The equipment can also be returned to the
manufacturer.
s. 19|23
User Manual: POD-037-ENG R06
T-connector
-
+4
+3
+2
+1
A+
LTT4
T-connector
