10
® Copyright ATH-Heinl GmbH & Co. KG, 2013, All rights reserved. / Misprint and technical changes reserved
/ Issue: 04/2012
6.5 Standard mode "Dynamic"
This function determines the parameter of the unbalance on the outer and inner side of the clamped wheel and shows then
the weight and the exact position of the counterweight.
After the wheel is clamped properly and the wheel parameters are entered follow the steps described below.
Input wheel parameters
Or close
protective bow
Stopps while opening the protective bow or with button "STOP"
Balancing finished
The measuring is finished and the
results of the unbalance are shown in
the display.
Turn the wheel until all LED´s at the
indicator „Outer“ illuminates and fix the
corresponding weight at the position 12
o´clock. (here 70 g).
Turn the wheel until all LED´s at the
indicator „Inner“
illuminates and fix the
corresponding weight at the position 12
o´clock. (here 40 g).
