5
® Copyright ATH-Heinl GmbH & Co. KG, 2013, All rights reserved. / Misprint and technical changes reserved
/ Issue: 04/2012
Further safety instructions in detail are indicated in the single chapters.
1.2 Technical data
Maximum wheel weight
kg
160
Motor performance
W
550
Stromversorgung
V / Hz / A
3x400 / 50 / 16
Balancing accuracy
g
1
Balancing rpm
U/min
120
Rim diameter
Inch / mm
13
–
24 / 330
–
610
Rim width
Inch / mm
5
–
20 / 127
–
508
Cycle time
Sec
Appr. 18
Max. wheel diameter
Mm
1200
Net weight
Kg
255
Dimension of machine (W x D x H)
mm
1640 x 730 x 1450
Noise level at operation
dB(A)
<70
Operating temperature
°C
0
–
50
Shaft diameter
mm
42
Pneumatic working pressure
bar
4
–
8
Cones diameter
mm
50
–
82
75
–
130
120
–
154
151
–
171
192
–
204
204
–
220
270
–
290
1.3 Recommendations
Read the operation manual carefully before use.
Keep the operation manual safe.
To guarantee a correct operation, machine parts are not allowed to be removed or modified. If reparations are
necessary, the technical service has to be notified or asked.
Clean the plastic faces with alcohol (do not use solvents).
Take care that the wheel is fixed firmly on the adapter before starting balancing.
The user is not allowed to wear clothing with sagging parts The user has to take care that there are no further
persons are nearby the machine during balancing process.
Do not put big parts on the machine, as this could affect the accuracy of balancing
Do only use the balancing machine for purposes which are described in the operation manual.
The balancing machine must be fixed firmly on the ground to achieve an exact balancing result.
