® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2018
- 22 -
31.
In the display appears [CAL]
–
[End]
32.
If [CAL]
–
[10] appears then the calibration is failed and must
be made again.
It is recommended that the ALU S program the display threshold to 10 g adjust.
Why:
- Since the machine determines the dynamic and static imbalance, the running property of the
wheel is changed in the weight attachment.
- Since the weights are further positioned in the centre of the rim, this automatically larger the
more correct balancing results are to succumbing.
- Since the machine requires the balancing weights at one point and there are different adhesive
weight systems, this can cause a large weight spread.
- The adhesive weights are not mounted 100% at the required location.
Summary of Contents for ATH W142
Page 1: ...USER S MANUAL ATH W142 ...