® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2018
- 25 -
Utilization
1.
Self-diagnostic
After switching-on the machine makes a self-
diagnostic and changes then automatically into the
mode „Dynamic”
2.
Mounting the wheel
Choose a suitable cone to centre the wheel on the balancing adaptor.
As shown below there are 2 simple possibilities to clamp the wheel.
a.
The first possibility for cantering is as
shown adjacent.
Here the rim will be clamped with a cone from
outside on the balancing shaft.
When using the biggest cone must be used
additionally the adaptor for the clamping
hood.
This possibility increases the danger of
clamping errors and is only recommendable
for steel rims.
b.
At the second possibility, first the
tension spring and then a suitable
cone will be placed on the balancing
shaft. With a clamping hood, the rim
can be clamped on the balancing
shaft.
Summary of Contents for ATH W142
Page 1: ...USER S MANUAL ATH W142 ...
