® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2018
- 28 -
b)
Wheel parameters and input for calculating the unbalance:
In the modes DYN, STA and ALU1 the following data
must be entered:
[A] Distance from wheel to machine
[B] Rim width
[D] Rim diameter
Input the values by place the measuring gauge on the
rim. In doing so the machine stores automatically the
data of [A] and [D].
Now the rim width must be entered with the buttons [B+]
/ [B-].
In the mode ALU2 and ALUS the following data must be
entered:
[A] Distance from machine to first weight position
[B] Distance from machine to second weight position
[D] Rim diameter
[dE] Rim diameter on the point for the weight
In the measuring process, first the measuring gauge
should be moved to the first point, after a short while it
can be moved to the second point.
In doing so the machine stores automatically the data
[A]; [B]; [D] and [De].
ATTENTION: The program ALUS don´t must be selected
before entering the parameters.
Summary of Contents for ATH W142
Page 1: ...USER S MANUAL ATH W142 ...
