© Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Printing errors and technical changing´s reserved / Version: 02/2017
- 32 -
3.
Chose the balancing mode
The adjustment can be made in the main menu:
DYN
Dynamic mode (default):
This function determines the height and side
balance of a steel rim.
The counter weights are attached to the outside
and inside of the wheel.
STA
Static mode:
This function determines the height balance of a
steel rim.
The counter weights are attached to an inner
position of the rim.
STA1
Static mode:
This function determines the height balance of a
steel rim.
The counter weights are attached to a middle
position of the rim.
ALU -1-
This function determines the height and side
balance of an alloy rim.
The counter weights are attached to defined
position on the wheel.
ALU -2-
This function determines the height and side
balance of an alloy rim.
The counter weights are attached to defined
position on the wheel.
ALU -3-
This function determines the height and side
balance of an alloy rim.
The counter weights are attached to defined
position on the wheel.
ALUS
This function determines the height and side
balance of an alloy rim.
The counter weights are attached to user-defined
position on the wheel.
For balancing alloy rims, we recommend selecting the ALU S mode. This not only takes into account
the exact cross-section of your rim, but also helps you to accurately position the adhesive weight.
Summary of Contents for ATH W82
Page 2: ...USER S MANUAL ATH W82 ...
