NOTE: Place the packaging with the equipment on a level surface. It is recommended that you place a
protective cover for your floor. Exercise caution when you are loading and transporting equipment.
Unpack and assemble the equipment where it will be used.
If necessary, ask the help of someone else.
ASSEMBLY
english
STEP 1
34L
34R
29
31
32
48
32
17
33
33
17
17 33
Install rear and front feets (31 and 48) to the main frame
(29) then fix using bolts (32), arc washer (17) and domed
nuts (33).
Attach the pedal (34L) to the crank, threading in a
counterclockwise direction.
Attach the pedal (34R) to the crank, threading in
clockwise direction.
Each pedals is marked with L (left) and R (right).
STEP 2
16
27
29
13
17
18
18
17
14
16
26
27
6
Approach the tower of the main structure, connect
the upper sensor cable (14) to the lower cable (26)
then connect the upper cable of tension control
(16) to the lower cable (27) (see detail).
Then insert the tower and fix using bolts (18) and
arc washers (17).
