background image

 

 

 

ATI Audio Inc.      

     Tel: 856-626-3480      

      Fax: 856-504-0220      

     sales@atiaudio.com      

      www.

 

 

audio.com 

 

One Year Limited Warranty 

 

ATI  warrants  this  product  to  be  free  from  defects  in  materials  and  workmanship  to  its  original 
owner for a period of one year from date of purchase. ATI will repair or replace such product or 
part thereof, which upon inspection by ATI, is found to be defective in materials or workmanship. 
 
The  Proper  Return  Authorization  Number  must  be  obtained  from  ATI  in  advance  of  return. 
Contact  ATI  at  856-626-3480  or  email 

sales@atiaudio.com

  to  receive  the  number  and 

instructions for return of your unit. 
 
A written statement providing the name, address, daytime telephone number and email address 
of the original owner, together with receipt from the original purchase, and a brief description of 
any claimed defects, must accompany all returns. Parts or product for which replacement is made 
shall become the property of ATI. 
 
The customer shall be responsible for costs of transportation and insurance to the factory of ATI, 
and shall be required to prepay such costs. 
 
ATI shall use reasonable efforts to repair or replace any product covered by this limited warranty 
within thirty days of receipt. In the event repair or replacement shall require more than thirty days, 
ATI shall notify the customer accordingly. ATI reserves the right to replace any product that has 
been discontinued from its product line with a new product of comparable value and function. 
 
This  warranty  shall  be  void  in  the  event  a  covered  product  has  been  damaged,  or  failure  is 
caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, 
failure  to  follow  instructions,  improper installation or  maintenance,  alteration,  or lightning, power 
fluctuations  and  other  incidental  or  environmental  conditions.  Further,  product  malfunction  or 
deterioration due to normal wear is not covered by this warranty. 
 
ATI 

DISCLAIMS 

ANY 

WARRANTIES, 

EXPRESS 

OR 

IMPLIED, 

WHETHER 

OF 

MERCHANTABILITY OF FITNESS FOR A PARTICULAR USE, EXCEPT AS EXPRESSLY SET 
FORTH HEREIN. THE SOLE OBLIGATION OF ATI UNDER THIS LIMITED WARRANTY SHALL 
BE  TO  REPAIR  OR  REPLACE  THE  COVERED  PRODUCT,  IN  ACCORDANCE  WITH  THE 
TERMS SET FORTH HEREIN. ATI EXPRESSLY DISCLAIMS ANY LOST PROFITS, GENERAL, 
SPECIAL,  INDIRECT  OR  CONSEQUENTIAL  DAMAGES  WHICH  MAY  RESULT  FROM 
BREACH OF ANY WARRANTY, OR ARISING OUT OF THE USE OR INABILITY TO USE ANY 
ATI PRODUCT. 
 
Some  states  do  not  allow  the  exclusion  or  limitation  of  incidental  or  consequential  damages  or 
limitation on how long an implied warranty lasts, so the above limitations and exclusions may not 
apply to you. 
 
This warranty gives you specific legal rights, and you  may also have other rights that vary from 
state to state. 
 
ATI  reserves  the  right  to  modify  or  discontinue,  without  prior  notice  to  you,  any  model  or  style 
product. 
 
If warranty problems arise, or if you need assistance in using your product contact us: 

Summary of Contents for DA2008-1








Reviews: