background image

Warranty

19

14

The condition of this warranty and our responsibilities under this warranty are as follows:
Warranty is non-transferable and is limited to the original purchaser only.

* You must be able to prove the date of original purchase of the unit with a dated receipt.

* The warranty is not applicable if the product has been subject to physical  abuse, 
improper installation, modification or repair by unauthorized third party.

,

* The responsibility of supplier s products shall be limited to the repair or replacement of

,

 the product at it s sole discretion.

* Specifically exempt from any warranty are limited-life consumable components subject 
to normal wear and tear such as batteries, decorates and other accessories.

* Supplier will not take any responsibility if the failure of the unit has resulted from 
accident, abuse, misuse, or any unauthorized repair, modification or disassemble.  

* Modification and repair of the unit should be done by authorized and qualified service 
center or returned to the manufacturer

*This warranty gives you specific legal rights, and you may also have other  rights which 
vary under local laws. 

Summary of Contents for H6



















Reviews: