16
Troubleshooting
No television audio.
• Select the sound card connector for TV audio input:
1
Click the TV button
in the Task control panel.
2
Click the Setup button
in the TV Tuner control panel.
3
Click the Video tab.
4
Click the Audio Input list box.
5
Select Line-In from the drop-down list then click OK.
If you have connected the audio internally, then choose
“CD Audio” or “AUX IN”, as appropriate.
Remember: to hear audio from the television, you must
make a connection between your ATI-TV Wonder tuner
card and your sound card. See
If you still cannot hear TV audio, check your mixer settings by following
the steps under
Windows® 95 or Windows® 98 initial set up
Windows
®
95 and Windows
®
98 troubleshooting tips.
• Right-click the ATI icon in the taskbar and select
Troubleshooting.
• If you have problems during start-up, start your computer in
Safe Mode.
To load Windows
®
95/Windows
®
98 in Safe Mode
1
Turn on your computer.
2
In Windows
®
95, press the F8 key when “Starting
Windows 95” appears on the screen.
In Windows
®
98, press and hold the Ctrl key until the
Windows
®
98 Startup Menu appears, then select the
number for Safe Mode and press Enter.
3
Select Safe Mode.
• Disable any programs that launch automatically when
you start Windows
®
95/Windows
®
98.
Line-In
MIDI
CD Audio
Line-In
Wave
01WonderGS.fm Page 16 Friday, January 22, 1999 4:34 PM
