ATI
MetriNet Ethernet/IP Communications Manual
29
O&M Manual
Rev-A (6/19)
The icon is part of the MetriNet EDS file. Right clicking on node on right side of
screen and selecting “Device Properties” will show the information from the node.
The node is active now.
Figure 16 – New Node Added Successfully to Driver Application.
Close Properties pop-up. Now, a Topic must be added to give the OPC server
access to the node. Select DDE/OPC and then “Add Topic.” Select node from
below Ethernet/IP driver on right, and create new Topic called Q46.
Figure 17 – Creating DDE/OPC Topic