OPERATION / MAINTENANCE
19
5.
Pull the cranking rope starter.
Cranking rope starter:
Slightly pull the handle of the cranking rope starter until you
feel some resistance and then pull it vigorously.
Let the cranking rope handle slowly return to its starting
position.
6.
If the choke lever for cold starting the engine was in the
CLOSED position, move it slowly to the OPEN position
while the engine warms up.
STOPPING THE ENGINE
To stop the engine in an emergency situation simply set the
ignition switch to OFF.
Proceed as follows under normal conditions:
1.
Set the throttle lever to SLOW.
2.
Turn the ignition switch to OFF.
3.
Set the fuel valve to OFF.
ADJUSTING THE ENGINE SPEED
Set the throttle lever to FAST.
Set the throttle lever to the required speed.
6.
MAINTENANCE
Proper maintenance is indispensible for safe, economic and
troublefree operation. It also reduces air pollution.
Improper maintenance or neglecting to correct a fault before
starting the unit may cause operating malfunctions which might
lead to serious injuries or death.
Follow the inspection and maintenance directions of these
operating instructions.
The following pages contain a maintenance plan, routine
inspections and simple maintenance measures with simple tools
to help you with the proper maintenance of your engine. Let
customer service carry out more difficult service tasks or tasks
that require special tools.
CRANKING
CHOKE LEVER
OPEN
THROTTLE
SLOW
IGNITION SWITCH
OFF
ON
FUEL
VALVE
OFF
THROTTLE
SLOW
FAST
Summary of Contents for GHB 760 A
Page 110: ... NOTIZEN ...
Page 111: ......
