MAINTENANCE
22
2.
Insert the dipstick without tightening the oil filler plug.
Check the oil level on the dipstick.
3.
If the oil level is too low: Fill with the recommended oil to
the rim of the filler neck.
4.
Screw the oil filler plug with the dipstick tight.
Operating the engine with the oil level too low may damage it.
ENGINE OIL CHANGE
Drain the used oil as long as the engine is still warm. Warm oil
drains quickly and completely.
1.
Place a suitable vessel under the engine to collect the used
oil. Unscrew the oil filler plug and the oil drain plug.
2.
Drain the oil completely. Now install the oil drain plug again
(tighten).
Dispose of the used oil in an environmentally compatible
manner. We recommend bringing the used oil in a tightly
closed container to your local service station or petrol
station. Do not discard used oil with the domestic waste; do
not dispose of into the soil or pour it into the sewer drain.
3.
Place the engine on a level surface and fill it to the rim of
the filler neck with the recommended oil.
Engine oil amount:
0.6 l
Operating the engine with the oil level too low may damage
it.
4.
Screw the oil filler plug with the dipstick tight.
ENGINE MAINTENANCE
AIR FILTER INSPECTION
Remove the air filter cover and inspect the filter. Clean or replace
the soiled filter elements. Make sure to replace damaged filter
elements.
AIR FILTER MAINTENANCE
A soiled air filter reduces the air supply to the carburettor and
thus the engine power.
When operating the engine in dusty environments the air filter
must be cleaned more often than specified in the
MAINTENANCE PLAN.
Operating the engine without air filter or with damaged air filter
allows dirt to enter the engine and causes quicker wear. Such
damages are not covered by the manufacturer warranty.
Dual filter elements
OIL FILLER
PLUG / OIL
DIPSTICK
OIL DRAIN PLUG
OIL LEVEL
PAPER FILTER ELEMENT
FOAM FILTER ELEMENT
AIR FILTER COVER
PAPER FILTER ELEMENT
FOAM FILTER ELEMENT
SEAL
Summary of Contents for GHB 760 A
Page 110: ... NOTIZEN ...
Page 111: ......
