9
Safety instructions
Before commissioning this product, read and keep to the
following advice. Also observe the preventive regulations of
your professional association and the safety provisions ap-
plicable in the respective country, in order to protect yourself
and others from possible injury.
Pass the safety instructions on to all persons who work
with the machine.
Keep these safety instructions in a safe place.
Make yourself familiar with the equipment before using it, by
reading and understanding the operating instructions.
Be attentive. Be careful what you do. Behave sensibly when
working. Do not use the device when you are tired or under the
influence of drugs, alcohol or medicaments. One moment of
carelessness when using the device can result in serious inju-
ries.
Do not use the device for purposes it is not intended for (see
“
Intended use
”
).
Familiarize yourself with your environment and pay attention to
possible dangers.
Do not use the instrument in potentially explosive atmos-
pheres where inflammable liquids, gases or dusts are pre-
sent.
Within his area of work the operator is responsible for third
parties.
Do not allow children to play with this machine.
Do not allow children to perform cleaning and maintenance
tasks.
Keep bystanders and animals away from your working area.
Do not allow other persons, especially children, to touch the
tool.
Switch off the machine if persons, in particular children or pets,
are close to you or if you change your working area.
Never leave the device unattended.
Do not work with the device barfooted or only with thongs on
your feet.
Take into consideration environmental influences:
Do not use the device in moist or wet ambience.
Do not operate the device on wet surfaces
Do only work with sufficient visibility conditions. Provide for
good illumination.
Remove all foreign objects (e.g. stones, branches, wires,
etc.) before sweeping. While working watch out for further
foreign objects.
If you come across foreign objects, please stop the device
and remove the foreign objects. Before you use the device
again check it for possible damages and have it repaired if
necessary.
Only operate the machine with complete and correctly attached
safety equipment (collecting hopper) and do not alter anything
on the machine that could impair the safety.
Do not modify the device or parts of the device respectively.
Never keep hands or feet close to or under rotating parts.
Keep your hairs, clothing and gloves away from moving
parts.
Always push the device forward while it is operating. Do not
pull it to yourself or behind you.
Avoid abnormal posture. Provide a safe standing position
and keep at any time the balance.
Do not sweep any burning or glowing objects.
Store unused equipment in a dry, locked place out of the reach
of children.
Check the machine for possible damage:
Before continuing to use the machine, the protective devic-
es must be inspected to ensure that they work perfectly
and with their intended function. This includes also the
grass catching bag if available.
Check if parts are damaged or defective. All parts must be
properly mounted and meet all conditions to ensure flaw-
less operation.
Damaged guards and parts must be properly repaired or
exchanged by a recognized, specialist workshop; insofar
as nothing else is stated in the instructions for use.
Damaged or illegible safety warning labels should be re-
placed immediately.
Maintain your device with care:
Ensure that all nuts, bolts and screws are tight.
Keep handles free of oils and grease.
Follow the maintenance instructions.
Repairs to other parts of the machine must be carried
out by the manufacturer or one of his customer ser-
vice points.
Use only original spare parts, accessories and special
accessory parts. Accidents can arise for the user
through the use of other spare parts. The manufactur-
er is not liable for any damage or injury resulting from
such action.
►
Description of device / Spare parts
Pos. Denomination
Order-No.
1.
Lower handle hoop
386704
2.
Upper handle hoop
386703
3.
Mushroom head screw M8 x 40
386702
4.
Distance sleeve
386701
5.
Knurled nut M8
386700
6.
Handle locking device left
7.
Handle locking device right
8.
Wheel 386718
9.
Wheel cap
386717
10.
Debris container
386705
11.
Circular brush
386706
12.
Adjusting knob for height
adjustment (rear brush roller)
386714
13.
Adjusting knob for height
adjustment (circular brushes)
14.
Fastener bag (6x ST3.9 x 16)
386736
15.
Accessories bag
16.
Belt short
386707
17.
Belt medium
386711
18.
Belt long
386710
19.
Circular brush fixture
20.
Guide roller
386709
21.
Brush roller front cpl.
386716
22.
Brush roller rear cpl.
386715
