14
Contents
Declaration of conformity
5 – 6
Device description / Spare parts
14
Extent of delivery
14
Assembly 14
Symbols machine
14
Symbols used in the operating instructions
14
Operating times
14
Normal intended use
15
Residual risks
15
Vibrations 15
Safety notes
15
Commissioning 17
Adjustments on the hedge trimmer
18
Working instructions
18
Maintenance and care
18
Storage 18
Guarantee 18
Possible faults
19
Technical data
19
Description / Spare parts
Pos. Denomination
Order-No.
1.
Knife
2.
Cover strip
362983
3.
Impact protection with suspension
shackle
362984
4.
a) Knife protection 610 mm
362985
5.
Hand guard
362986
6.
Front handhold with switch button
362987
7.
Ventilation slots
8.
Rear handhold with circuit closer
and circuit breaker
9.
ON-OFF switch
362988
10.
Switch for the angular motion of
the rear handhold
11.
Cable with power plug
12.
Carbon brush set (without picture)
362989
13.
Safety label
362990
Extent of delivery
•
Hedge trimmer
•
Hand guard
•
Knife protection
•
Operating manual
After unpacking, check the contents of the box
!
That it is complete
!
Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
Assembly
Attach the hand guard with screws to the device prior to startup.
(Page 2, fig. A).
Symbols machine
Carefully read
operator’s
manual before
handling the
machine.
Observe instruc-
tions and safety
rules when
operating.
Shut off engine and
remove power cord
before performing
cleaning,
maintenance or
repair work.
Do not expose to
rain or
moistness.
When connecting
cable is damaged or
cut through
immediately pull out
the power plug.
Wear eye
protection.
Wear protection
gloves.
Electrical devices do not go into the domestic
rubbish. Give devices, accessories and packaging
to an ecofriendly recycling.
According to the European Directive 2002/96/EC on electrical
and electronic scrap, electrical devices that are no longer
serviceable must be separately collected and brought to a
facility for an environmentally compatible recycling.
Symbols used in the operating instructions
Threatened hazard or hazardous situation.
Not
observing this instruction can lead to injuries or
cause damage to property.
L
Important information on proper handling.
Not
observing this instruction can lead to faults in the
machine.
User information
. This information helps you to
use all the functions optimally.
Assembly, operation and servicing
. Here you are
explained exactly what to do.
Operating times
Before initiating the device please observe the provisions
pertaining to corresponding laws (regional provisions) for the
noise control.
