19
Possible faults
Fault
Possible cause
Removal (disconnect power plug)
Hedge trimmer does not
work.
•
No power
•
Power failure
•
Extension cable defect
•
Safety fuse defect
•
Motor or switch defect
•
Check cable, no longer use defect cable protection
•
Check cable, no longer use defect cable protection
•
Check power supply, power outlet, fuse
•
Replace fuse
•
Have motor or switch checked by an approved
electrician or replaced by original spare parts
Hedge trimmer cuts with
interruptions
•
Cable defect
•
Internal failure
•
Circuit closer/breaker defect
•
Check cable, no longer use defect cable protection
•
Manufacturer or responsible customer service
respectively must be called
•
Manufacturer or responsible customer service
respectively must be called
Motor is running, knives do
not move
•
Internal failure
•
Manufacturer or responsible customer service
respectively must be called
Knives get hot
•
Knives are edgeless
•
Knives are defect
•
Missing lubrication
⇒
friction
•
Arrange sharpening of knives
•
Exchange knives
•
Lubricating of knives
Motor is humming, knives
do not move
•
Knives are blocking
•
Remove object
Technical Data
Type / Model
!
HS 710/61
Year of construction
!
see last page
Motor output P
1
!
710 W
Mains voltage / Mains frequency
!
230 V~ / 50 Hz
No-load speed n
0
!
1600 min
–1
Length of knives
!
610 mm
Cutting length
!
534 mm
Thickness of blade
!
1.8 mm
Cutting distance
!
22 mm
Adjustment of handhold
!
± 90° (180°)
Hand-arm vibration front according to EN 1033/DIN 45675
!
a
h
= 3.781m/s²; K = 1.5 m/s²
Hand-arm vibration rear according to EN 1033/DIN 45675
!
a
h
= 3.991m/s²; K = 1.5 m/s²
Sound power level L
WA
(according to regulation 2000/14/EC)
!
measured sound power level 98.25 dB (A)
K = 2.89 dB (A)
!
guaranteed sound power level 101.17 dB (A)
Sound pressure level L
PA
(according to regulation 2000/14/EC)
!
78.28 dB (A); K = 2.89 dB (A)
Weight
!
approx. 4.2 kg
Protection class
!
II
