12
Characteristic data of noise
DIN EN ISO 3744
Use of the machine as a bench to circular saw with standard
circular saw blade.
Noise power level Sound pressure level at the workplace
L
WA
= 104 dB(A)
L
pA
= 91 dB(A)
The factor of measurement uncertainty is 3 dB.
The values given are emission values and must therefore not
simultaneously represent safe workplace values too. Although
there is a relationship between emission and immersion levels,
it can be reliably deduced whether additional precautionary
measures are necessary or not. Factors, which can influence
the immersion level currently existing at the workplace include
the duration of the effects, the special type of the workroom,
other noise sources, etc. e.g. the number of machines and
other adjacent processes. The permissible workplace values
can also vary from country to country. This information should
however enable an improved assessment of the danger and
risk to be carried out.
Symbols machine
Carefully read operator’s manual before
handling the machine.
Wear eye and ear protection
Wear dust mask.
Shut off engine and remove power cord
before performing cleaning, maintenance or
repair work.
Do not expose to rain. Protect against
humidity.
Risk of injuries of fingers and hands by the
saw blade
This product complies with European
regulations specifically applicable to it.
Machine of the protection class II
(double insulated)
Electrical devices do not go into the
domestic rubbish. Give devices, accesso-
ries and packaging to an ecofriendly
recycling.
According to the European Directive 2012/19/EU on electrical
and electronic scrap, electrical devices that are no longer
serviceable must be separately collected and brought to a facility
for an environmentally compatible recycling.
Symbols Operating instructions
Threatened hazard or hazardous situation.
Not
observing this instruction can lead to injuries or cause
damage to property.
Important information on proper handling of the
saw.
Not observing this instruction can lead to faults in
the machine.
User information.
This information helps you to use all
the functions of the chain saw optimally.
Assembly, operation and servicing.
Here you are
explained exactly what to do.
...
Please refer to the attached assembly and
operating instruction sheet for references
to figure numbers in the text.
Normal intended use
The bench-type circular saw is intended exclusively for
ripping and cross-cutting solid wood and panel materials
such as chipboard, core-board and medium density
fiberboard with square or rectangular cross-section using
carbide tipped saw blades, whereby only saw blades
conforming to EN 847-1 are accepbench.
The diameter of the saw blade must lie between 248 and
250 mm.
The use of saw blades made of HSS steel (high-alloy high
speed steel) is not permitted since this steel is hard and
brittle. Risk of injury through saw blade breakage and
expulsion of saw blade pieces.
Cutting round material (posts, firewood, etc.) is not
permitted.
This saw may not be used for rebating or cutting grooves.
Do not use this saw for cutting inserts (grooves that end in
the workpiece).
Only workpieces which have been securely mounted and
aligned can be processed.
The intended usage also includes compliance with the
operating, servicing and repair conditions prescribed by the
manufacturer and following the safety instructions included
in the instructions.
The relevant accident prevention regulations for the
operation as well as the other generally acknowledged
occupational medicine and safety rules must be complied
with.
Any other use is deemed not to be use as prescribed. The
manufacturer is not liable for any type of damage resulting
from this: the user bears the sole risk.
Independently made alterations to the circular saw preclude
any liability of the manufacturer for resulting damages of
any kind.
The circular saw may only be equipped, used and serviced
by persons who are familiar with these and have been
instructed in the hazards. Repair works may only be carried
out by us or by a customer service agent nominated by us.
