800.261.3602
Revised 07/18
Specifications
Size & Weight:
4.0” H x 4.70” W x 0.75” D, 5.9 ounces
Mounting:
3.5” H x 4.15” W cutout opening with mounting
brackets
Power:
9 to 16 DC from battery
Maximum Charging
Current (Amps):
35 Amps from solar panel array (620 watts max.)
Maximum Charging
Solar Voltage:
25VDC (open circuit voltage) from solar panel array
Bulk/Absorption
14.4VDC / 14.4V/ 14.0V
Voltage:
Wet Lead-Acid/ AGM/ Sealed/Gel
Float Voltage:
13.7V (Wet Lead-Acid/ AGM/ Sealed/ Gel)
SunExplorer’s Idle
15mA normal mode
Current Draw:
35mA with back light on
Display:
3 digit LCD to 999 or 99.9 with
decimal 0.5”character height
Battery Percent
12.8V = 100%, 12.55V = 75%, 12.4V = 50%
Remaining:
11.75V = 25%, 10.5V = 0%
Low Battery:
Detects low battery @ 11.8V
Battery Type:
Wet, AGM, Sealed/ Gel (default is wet battery)
Temp Sensors:
LM335T PT (Required for temperature compensation)
Available in 96” or 192” wire lengths
Temperature
Compensation:
24mV/°C .13mV/°F
Solar Voltage:
Display range 0 to 25.0VDC
Solar Charge:
Display range 0 to 35.0 Amps
Solar Amp Hours:
Display 0 to 999 accumulated
Solar Charge
7
th
LED position not lit – not charging – night mode
Status:
Red LED: Bulk charging stage
Green LED: Floating charging stage
Orange LED: Equalization charging stage
Temperature:
-10 to 55°C/ -14 to 131° F
3