107
Kullanım Kılavuzu
ATLANTA Xtrend - ET9000
Installation of Atlanta Xtrend-ET9000
This chapter will guide you through the whole installation process of Atlanta Xtrend-ET9000. Please read each section
carefully to make sure that the system runs properly.
Connecting Satellite Cables
Atlanta Xtrend-ET9000 is integrated with twin satellite tuners, and one of the first steps is to connect satellite cable(s) to
Atlanta Xtrend-ET9000 in order to gain optimal signal quality. You can either choose one of the following connection
methods depending on the equipment you have.
Two Separate Satellite Cables
In case you have two separate satellite cables providing different broadcast signals, you can configure TUNER
1 Input and TUNER 2 Input independently.
Internal Loop-through
In case you have only one satellite cable, connect the cable to TUNER 1 Input.