158
ATLANTA Xtrend - ET9000
Kullanım Kılavuzu
Universal Remote Control
The universal remote control allows you to operate the most important functions such as power on/off and volume
control on your television, audio-video receiver, or DVD player. To be able to control the device, you must adapt the
remote control to the device first.
Setup method
1-1. Initial Settings
Device Default: STB
Remote Control Default Setting Code
5) STB: 001
6) TV: 001
7) DVD: 001
8) AUX: 001
1-2. Settings method
3-DIGIT Setup Method
9) Turn on the device that you want to setup (for example turn on TV)
10) Press and hold [DEVICE] + [OK] button more than 2 seconds until the device LED blinks.
If there is no key input for 20secnds, the Remote Control will exit the setting mode and return to normal mode.
11) Enter the 3-Digit setup code from the Brand list. (The LED will blink by Key input)
When the 3-Digit setup code is input, the designated Power Code will be output. (LED blinks)
Verify whether it operated properly by pressing the [Power] button. (If the device does not operate properly,
press next 3-Digit setup code)
In case the 3-Digit setup code is not valid, the LED will off for 1.5seconds and revert to on status for input
mode.
It does not answer against key input other than [OK], [0~9], [CH+], [CH-], [Power] key.
12) Press [OK] button to save and exit the setup model. (LED will blink 2 times and off)
Auto Search (CH+, CH-) Setup method
13) Turn on the device that you want to setup (for example turn on TV)
14) Press and hold [DEVICE] + [OK] button more than 2 seconds until the device LED blinks.
If there is no key input for 20secnds, the Remote Control will exit the setting mode and return to normal mode.
15) Press [CH+] or [CH-] button. By pressing the button, the power code of next setting number will be output.
(LED blinks)
It does not answer against key input other than [OK], [0~9], [CH+], [CH-], [Power] key.
16) Press [OK] button to save and exit the setup model. (LED will blink 2 times and off)
1-3. Setup Code Read Out (Number Call)
Press and hold [DEVICE] + [OK] button more than 2 seconds until the device LED blinks.
