Water Gardens
LENGTH
WIDTH
DEPTH
4
F
CLASSIC
2-SKIMMERS
2-FILTERFALLS
10’
5’
3’3”
8’
F
F
F
Oasis Skimmer Installation
EXCAVATING AND SETTING THE SKIMMER (PS3900)
Prior to setting the skimmer you must first determine the surface level of
the water in the pond. Once you have this number you can excavate for the
Skimmer. The excavation should be a few inches wider and longer than the
Skimmer body. The depth of excavation for the PS3900 should be 15” below
water level. For your Oasis skimmer dig the hole depth 15” this will determine
the approximate depth of the hole below water level. *Do not dig too deep.*
The skimmer should be set on undisturbed earth if possible. In the case that
you over-dig, be sure to compact the soil thoroughly to prevent settling. The
bottom of the hole should be level side-to-side and front-to-back.
5
