ENGLISH
23
1000 Mbps
This indicator will light solid green when the
corresponding port is connected to a 1000Mbps
device.
The Power LED is not lit
•
Make sure the AC power Adapter is plugged into
an outlet properly and it's connector is plugged
into the power jack of the switch.
•
Make sure the power source is ON.
•
Make sure you are using the included power
adapter supplied with your switch.
The Link/Act LED is not lit when a device is connected to the
corresponding port
•
Make sure that the cable connectors are firmly
plugged into the Switch and the device.
•
Make sure the connected device is turned on and
its adapter is installed correctly and is working.
•
The cable must be less than 100 meters long.
3.6 Rear Panel
The rear panel of the NetMaster G16/24 only features a power receptacle, which is an
AC power receptacle. Connect the female of the power cord head here, and the male
head to the AC power outlet.
4 Product Support
If you have any problems with this device, please consult this manual. If you continue
to have problems you should contact the dealer where you bought this device. If you
have any other questions you can contact the Atlantis Land company directly at the
following address:
Atlantis Land SpA
Viale De Gasperi, 122
