NetCamera NV
2.4 Assembling the Stand and Connecting to a Network
The camera can be assembled in two
different ways; either from the top of the
unit or the bottom. Assemble the stand
and fix it to the cam-era as shown.
Use the three screws and plugs provided
to fix the stand bracket to a wall, ceiling
or other convenient fixing point.
The stand can be adjusted to allow the
camera a full 360º of rotation and a pan
and tilt action.
Follow the above steps to mount from the
base of the unit, attaching the stand
bracket to the mounting point on the base
of the unit.
Ensure the camera is fixed securely otherwise it may fall and
cause injury.
The camera is not waterproof and should not be mounted
outside or in a position where it could become wet.
Connect the power adapter to the DC-IN socket on the camera as shown then check
Power Led.
Summary of Contents for A02-IPCAM3_ME01
