40
Key in correct Public IP address for Gateway / Netmask
(2) Under CLI Mode:
Add a PAT Entry
Set IP LAN “Public Gateway Address” “Netmask”,
For example, set IP LAN to 202.39.52.190 255.255.255.0
What can I do if PCs or workstations in the LAN can’t be connected to Internet after setting
public IP address?
Solution.
First, Please make sure that the public IP address you set is a legal public IP address, and
then check that the public IP address has not occupied by other users. Second, make sure
the IP address of each server is static and the IP Address/ Netmask/ Gateway information is
completed.
And to make sure all PC is connects router with correct ISP.
Why can’t I set up IP Filter function in GUI?
Answer.
Due to the consideration of security, you only can set up Profile in GUI Mode, and for the
LAN; it only can be revised under the CLI Mode.
Solution.
Connect the PC to MISTRAL LAN ROUTER ISDN with a null modem type cable and enter
CLI mode to start IP Filtering by Telnet or Hyper-terminal.
What should I do if the Firmware upgraded fail in the device, and it affects me have trouble
to get into CLI & GUI screen?
Answer.
It will go through the process of Vector->Boot Code->App Code once its power on, the CLI
can be used to update Firmware as long as the Boot Code doesn’t expired.
Solution.
1. Open Hyper terminal
2. Make sure baud rate is 19200,n, 8,1,none
3. Connect the cable with both Com Port and Console Port
4. Turn on MISTRAL LAN ROUTER ISDN
5. Choice the connection speed, then you can update the Firmware by delivery the chosen
Firmware file.
