Cau on :
Take care at dispensing me, don’t touch the hot beverage with your hand
during dispensing. Hot water can cause burns to user.
2.2.6
A er dispensing the beverage switch off the tea & coffee machine if not in
use for long me.
A en on!
Risk to user!
A en on!
Hot Liquid
14
Note:
a) To clean plas c cup upper remove the plas c
cup upper, as you can see the image (a)
Image (a)
Open the cover of the water reservoir on top of the machine and fill will water.
Open the front door and remove the canisters. Fill the canisters with beverage mix
powder. Replace the canisters and close the door.
Plug the mains cord of the machine into the power outlet and switch on the mains.
Turn on the main switch at the back of the machine.
The machine will now be in the powered on mode and the ‘WAIT’ indicator would
be glowing indica ng that the water is hea ng. The machine will be ready to
dispense once the ‘WAIT’ indicators turn off.
Open the dispensing area door and place empty cup on the tray under the beverage
outlet. Close the door.
Select the beverage cups size and strength using the respec ve and bu ons
on the le hand side.
Press bu on on the right hand side for the beverage selected. The machine will
dispense the drink.
Open the dispensing area door and remove the cup. Enjoy your cup of hot drink !
USER’S MANUAL
2.2.4
Wait for beverage dispensing.
2.2.5
Your beverage is ready to drink.
Dispensing in Micro
2.3 Daily Cleaning Opera on:
2.3.1
Material: Single use co on, food grade utensils, Detergent.
2.3.2
Hygiene: Wash hands thoroughly with water and soap before handling the
machine and products.
2.3.3
Use only potable water to clean the machine.
