OnePower UPS 700VA/300W(EN)
A03-PE702 Pag. 16
1.4 Placement
To prevent the risk of fire or electric shock, install in a temperature and humidity
controlled indoor area, free of conductive contaminants.
•
This UPS system is designed for indoor use only.
•
Do not install the UPS under direct sunlight. Your warranty will be void if
the batteries fail due to overheating.
•
Install in a temperature and humidity controlled indoor area
•
To eliminate any overheating of the UPS, keep all ventilation openings
free from obstruction and do not place any foreign objects on top of the
UPS. Keep the UPS 15 cm away from the wall.
1.5 Connect the loads
First, connect the UPS with the AC Mains, then plug the loads into the output
connectors on the rear of the UPS. To use the UPS as a master “On/Off” switch,
make sure that all of the loads are switch “On”.