34
APPENDICE A: Risoluzione dei problemi e Supporto
Questo capitolo illustra come identificare e risolvere eventuali problemi riscontrati
con l’utilizzo del dispositivo.
A.1.1 Problematiche dell’UPS
I LEDs ed i segnali acustici sono un utile strumento per individuare eventuali
problemi, osservandone lo stato e/o ascoltandone il tipo di beep è possibile
individuare velocemente un eventuale malfunzionamento.
Situazione
Controllo
Soluzione
Nessuna indicazione ma
allarmi in presenza di
rete elettrica.
1.
Il cavo di alimentazione è
connesso alla rete
elettrica?
2.
Il cavo di alimentazione è
collegato all’UPS?
1.
Accertarsi che il cavo di
alimentazione sia
propriamente collegato
alla rete elettrica.
2.
Connettere il cavo di
alimentazione nel plug
AC dell’UPS.
Sul display è visualizzata
l’icona
e il codice
di avviso
è
lampeggiante mentre
viene riprodotta una
segnalazione acustica (1
beep al secondo).
La funzione EPO è attiva.
Chiudere il circuito EPO
per disabilitare la funzione
EPO.
Sul display è visualizzata
l’icona
e il codice
di avviso
è
lampeggiante mentre
viene riprodotta una
segnalazione acustica (1
beep al secondo).
Controllare la messa a terra
o provare ad invertire il verso
della presa elettrica.
1.
Invertire la polarità.
2.
Chiamare un elettricista
e fare controllare
l’impianto elettrico in
caso il problema
persista.