29
Try the field working condition by running some application programs on your
computer and repeating step.
Check if the UPS is initiated properly to support continuous operation.
Plug the UPS into the wall outlet to charge the UPS for over
6 hours before using the UPS.
1.8 Front Panel Explanations
On the front panel You can found a LCD Display for an easy diagnostic
LED
Information
Main Switch
To Control on/off the UPS when Utility is normal.
To enable “DC-Start” Function when Utility fails. (To enable DC
Start properly, you are recommended to connect <80% output
load with the UPS only). P.S. Make sure the computer connected
to the UPS is switched on before enable the "DC-Start" function.
You are not recommended to add some other computer or
peripherals after DC-Start function is activated.
1
Input voltage.
2
Output voltage.
3
AC mode indicator.
